Feeding System For Cutlery Fork Trimming
- Huizhi Haoda
- China
- 25~45 days
- 1000 sets per month
This feeding system is combine with punch press machine to achieve stainless steel fork trimming automation.
All kinds of materials for cutlery could be processed with this feeding system, such as 304#, 201#, 430#， 420#， 410#. etc.
With this feeder, one worker could operate 2~5 sets of machine at the same time.
XB-202, Feeding System for Cutlery Fork Trimming
1. Pneumatic manipulator, could process all kinds of material, both of magnetic and non-magnetic are available.
2. Mostly used for non-magnetic cutlery, tableware or kitchenware manufacturing.
3. Save labor cost, one worker could operate 2~5 sets of machine at the same time, output 22~25 pieces of stainless steel fork per minute.
4. Improve market competitiveness, high-precision production, up to 99% succeed produce.
5. Easy operation, only need the worker to switch on/off the machine, loading and unloading the materials from feeder's inlet/outlet.
6. Safety production, no need the worker put hands in the framework of the hydraulic press or punch press machine, avoid production accident.
7. Low power consumption, 0.02kw/h.
Technical Specifications:
| Thickness of the product | 1~7mm |
| Length of the product | 100~220 mm |
| Output | 22~25 pieces per minute |
| Dimension of worktable | L480 * W240 mm |
| Dimension of material inlet/outlet | L900 * W240 mm |
| Power | 220V, 20W |
Material inlet:
Before process & after process:
Material outlet:
For more information, please inquiry us with following information:
1. Photo or video of the sample.
2. What are material, length, weight and thickness (min & max) of the sample?
3. The capacity requirement and your factory production situation.
With above information, our engineers could help you to do the process analysis and find a good production solution for you.
Don't hesitate, just email us, you could get the Plan of Automatic Production Line for your product or factory FREELY!
Please send an inquiry with below information: 1. Photo of the sample. 2. What is material, length, weight and thickness (min & max) of the sample? 3. You capacity requirement, and your factory production situation. With this information, our engineers could help you to do the process analysis and find a good production program for you....more
