Automatic Feeder For Cutlery Manufacturing 2 In 1
- Huizhi Haoda
- China
- 25~45 days
- 1000 sets per month
This pneumatic feeder is installed in the punch press machine, could finished two steps of plastic/wooden handle stainless steel fork manufacturing, include fork tine cutting and fork cup bending. 410#, 420#, 430# standard materials could be process with this automatic feeder.
The feeder's work process is use the high magnetic rod to hold the stainless steel sheet from the automatic feeder's inlet and convey the stainless steel sheet to do fork tine cutting and fork cup bending, then the rod convey the finished fork to feeder's outlet. Cycling work in this mode, the stainless steel cutlery fork could be produced automatically.
DGW-008 Automatic Feeder for Cutlery Manufacturing 2 in 1
Features:
1. High output and efficient production, one automatic feeder could finished all process of the stainless steel spoon manufacturing, metal sheet in, spoon out.
2. Replace manual production, save labor cost, one worker could operate 2~4 sets of machine at the same time, one machine could process 38~42 pieces of fork per minute.
3. Improve competitiveness, high-precision production, up to 99% succeed produce.
4. Easy operation and maintenance, only need the worker switch on/off the machine and loading/unloading the materials from the automatic feeder.
5. Safety production, no need the worker put hands into the frame of the hydraulic press or punch press machine, avoid production accident.
6. Low power consumption, 0.02kw/h.
Specifications:
| Thickness of the product | ≤3 | mm |
| Length of the product | 80~130 | mm |
| Process speed | 38~42 | pcs/min |
| Dimension of worktable | L480*W280 | mm |
| Dimension of material inlet/outlet | L850*W165 | mm |
| Power | 220V | 20W |
Don't hesitate, just email us, you could get the Plan of Automatic Production Line for your product & factory FREELY!
Please send an inquiry with below information: 1. Photo of the sample. 2. What is material, length, weight and thickness (min & max) of the sample? 3. You capacity requirement, and your factory production situation. With this information, our engineers could help you to do the process analysis and find a good production program for you....more
